How to install bamboo flooring – The first step is to add pieces of substrate strips side by side. It should be installed in such a way that they do not overlap with each other. This is added for the purpose of reducing noise from bamboo flooring. Second, bamboo flooring can be installed using either glue or nails. If you have cement floor, then glue is a better option while for others, use your nails.
Now it’s time to install the flooring. Read how to install bamboo flooring from the manufacturer’s instructions carefully before installing them. You have goals on the floor and from it you can decide how much number of full boards and partially boards are required to cover the entire floor. Examine each of the board to check out if there is any damage to any of them. Fourth, find the best starting point for installation. Add the first two rows and press the boards against each other in such a way that the joints between them are properly closed.
If necessary, use a hammer to fit them tightly together. So take a hard hammer and nails and fix nails at a distance of 8-10 inches. Follow the same procedure for the subsequent rows. Work in small sections at a time. Last, once the floor installation work is complete, inspect the surface carefully to ensure that there is no offset joints. Finally, replace the base moldings again. Thus how to install bamboo flooring work comes to an end.