5 light crystal chandelier – Use a stud finder to locate the studs in the ceiling where the chandelier hung. Make a hole in the right foot, ensuring that the drill hits the wood and the use of a drill with a diameter smaller than the diameter of the wire hook eye 1 inch. Set a hook eye 1-inch hole drilled in the ceiling hook eye placing in the hole and the rotation of the hook head eye to the right. Insert a screwdriver into the eyehook if hands tighten it becomes difficult.
Open a carabineer 1 inch and pass through the eyehook. Pass the end link of chain length for each attachment point in the 5 light crystal chandelier through the carabiner 1 inch and turn the lock to close. Spend a carabineer 3/4-inch on each section of the candelabra rests a string, looking for places where the carabineer will not change his position and the chain will not make contact with the flame of a candle.
Place each carabineer 3/4-inch to a length of chain hanging from the ceiling. Open the carabiner 3/4-inch string to adjust and pull the chain link carabiner. Attach the following more or less link in the chain to snap and reassess the leveling of the 5 light crystal chandelier. Repeat until the level candelabra hangs.